WAM Butterfly Valve Limit Switch with visual indicator of valve position. This kit is equipped with installation instructions, limit switch, installation hardware and limit switch Cam for adjusting limit switch. WAM Part Reference: MIC23
MIC23 signal switch is a kind of on-site instrument for detecting the valve status in the automatic control system, which is used to output the opening or closing position of the valve with the signal of the switching value, which is received by the program controller or searched and sampled by the computer, execute the next procedure after confirmation. This product can also be used as important valve chain protection and remote alarm indication in the automatic control system.
Performance
- High strength of PC shell, switch position can be clearly identified indicators
- protection level: IP 67/NEMA4 & 4X (standard) IP68 (optional) 50-60hz
- device: positioning component signal can be adjusted
- mechanical switch: 2 Single-Pole Double-Throw (SPDT)
- contact Mode: 250VAC/16A, 400VAC/10A
- single-wire interface: PG9
- terminal: 5 (0.08-2.5mm² / square mm)
- Net weight: 320g
technical features
1, Working medium: dry or lubricating gas, non-corrosive gas
2, Supply Pressure: bidirectional return 4 ~ 8bar;
3, Temperature: -20 ° C ~ +80 ° C
4, External stroke regulation: 90 ° ± 5 °
Basic Composition:
A micro switch box C/W circuit board and micro switch [ef81161.3]
One cable sealing pipe
An interval circle (not for CP101 and CP063)
Two cams
A top cover with washer and fastening screw
One indicator cover
An O-ring
Three top covers with fastening screws
A copper lining ring
A serrated pad
